Heatscope Spot 2800 Watt - White - Manual

Thermodynamics: Ultra-Short Inertia (3 Seconds)

The efficiency of the Spot range is based on the use of dual high-density carbon fibre heating elements. This engineering allows the heater to reach full thermal output in just 3 seconds after being switched on.

The unit emits medium-wave infrared radiation (IR-M). This specific spectrum offers the advantage of not heating the surrounding air unnecessarily, but instead transferring energy directly to solid bodies, whether people, furniture or surfaces within its diffusion cone. This technology significantly improves comfort in open or semi-open spaces, while also allowing the heating to be activated only when the area is actually in use.

Sizing: 2800 Watts of Raw Power

With a nominal output of 2800 Watts, this model sits at the top of the range in terms of heating capacity. It has been designed to maintain a high level of comfort in more demanding configurations, where lower-powered appliances may reach their limits.

• Installation height: its output allows it to be installed between 2.40 m and 3.00 m while maintaining effective heat projection towards the living area.
• Exposed spaces: it provides a particularly relevant response for semi-open terraces and areas subject to air movement.
• Electrical connection: this level of power integrates ideally into a dedicated electrical installation, with fixed control suited to residential and professional projects.

Optical Design: Patented Reflector and Soft Light Output

The extruded aluminium housing incorporates a high-efficiency ribbed rear reflector. Its geometry is designed to direct radiation towards the front of the unit, optimise heat diffusion and improve the appliance’s overall efficiency.

One of the major advantages of carbon technology also lies in its controlled light emission. Behind its vitroceramic protective screen, the incandescence of the tubes is filtered so as to produce only residual light measured at less than 600 lux. The heater therefore emits a soft, non-aggressive orange glow that preserves the lighting atmosphere and architectural character of reception areas.

Control Interface: Physical Operation

The manual version adopts a direct and reassuring approach to control. On the appliance profile, a control panel integrates physical switches allowing simple management of the heater’s operation.

• Main switch (ON/OFF): for switching the unit on and off.
• Power selector: allowing a choice between 50% (1400W) for gentler warmth, or 100% (2800W) when full output is required.

Radiant Matrix and Spatial Coverage

Heating performance is assessed according to how enclosed the equipped space is. For maximum efficiency, the effective area can reach 15 m² in an indoor environment such as a winter garden. In a protected semi-open configuration, such as a lean-to pergola, effective coverage is concentrated around 12 m². On a more open terrace, the targeted thermal footprint remains around 10 m².

Detailed Technical Specifications