heatme SMART Charging Station (12 units) – Compact 30x40 Format
Compact induction charging infrastructure. Designed to manage a fleet of 12 rectangular heated cushions 30x40 without any manual connection, it silently regenerates each module for the next service.
1) Immediate Benefits for Your Business
Commercial Impact & R.O.I.
- Targeted customer retention: Shallow seats are the first to be abandoned in cold weather. Equipping them removes this obstacle instantly.
- Extended seasonality: Every extra minute spent seated converts into additional sales. Twelve well-managed cushions mean 12 active tables during the off-season.
- Controlled energy use: 190 W maximum when the tower is full, and only 15 W in standby mode.
Ideal for Small Seating Capacity
- Suitable format: Perfect for neighbourhood cafés, VIP lounges, or event spaces limited to around twelve seats.
- No damaged cables: Magnetic induction transmission removes USB ports and connectors exposed to wear.
- Plug & Play system: No network or software configuration required. A simple standard 220 V socket is enough to start.
2) Installation and Inductive Technology
How charging works
Energy transfer begins after 1 to 2 minutes of synchronisation (safety delay). The tower stops power at 100% and reactivates it if needed in standby.
- ▪ LED progress 0–30%: First charging phase in progress.
- ▪ LED progress 30–60% then 60–100%: Clear visual indication of progress.
- ▪ Automatic switch-off: Indicator lights turn off when the cushion is fully charged. No energy is wasted.
Start-up in 3 steps
The cable is discreetly positioned at the rear. Protect the line with at least a 10 A fuse.
- Connection: Plug into mains power (220 V).
- Initialisation: The tower activates automatically, with no action required.
- Insertion: Slide the cushions into the slots, charging starts automatically.
3) Safety, Exclusivity and Control
Reminder: the SMART 30x40 cushion
- Heat control: Starts at maximum level. One click (medium), two clicks (soft), three clicks (manual standby).
- Smart shut-off: Occupancy sensor stops heating 10 minutes after the customer leaves. Zero passive waste.
- Manual battery test: Press for 3 seconds = 3 LEDs (>60%), 2 LEDs (30–60%), 1 LED (<30%).
- Outdoor fabric: Non-slip underside, robust fabric, removable cover with waterproof zip.
Integrated Anti-Theft Protection
Cushion electronics are encrypted to respond only to the official SMART Tower. They are incompatible with smartphone chargers or third-party bases.
Result: a heatme SMART cushion cannot be recharged at home, making theft attempts by customers completely pointless.
4) Technical Sheet: SMART Tower 12 (30x40 Format)
Frequently Asked Questions (FAQ)
Can I connect this 12-slot tower to a standard socket?
Yes, a 220 V socket protected by a 10 A fuse is more than sufficient. Maximum consumption of a full tower is only 190 W, significantly less than a standard hairdryer.
How do I clean a 30x40 cushion if stained?
Remove the fabric cover using the zip for machine washing at 30 °C (gentle cycle). Never wash the internal electronic block — always remove it before cleaning.
