heatme SMART 12 Induction Station – Square Comfort 40x40
The charging station designed for venues equipped with large armchairs (hotels, private lounges, premium hospitality spaces). It simultaneously manages 12 square heated cushions 40x40, regenerated without any manual connection through magnetic transmission.
1) Immediate Benefits for Your Business
Commercial Optimisation (R.O.I.)
- Extend guest stay: The thermal wrap provided by the 40x40 format (thighs and pelvis) is unmatched. Guests protected from the cold stay longer and order more.
- Premium spaces enhanced: Each cushion transforms a patio or terrace usually closed in winter into a genuine premium hospitality area.
- Immediate profitability: A profitable investment from the very first cold season, with no construction work or heavy infrastructure.
12 Large Seating Configuration
- Hospitality format: Designed for generous furniture sizes (wide rattan armchairs, brasserie chairs) where a small cushion would look out of place.
- Zero USB connector: The pure induction tower removes the main failure point found in rechargeable professional equipment.
- Smart shutdown: The system switches off automatically if the seat remains unoccupied for 10 minutes (zero waste).
2) Installation and Inductive Technology
Wireless Charging Cycle
Charging begins after 1 to 2 minutes of electronic synchronisation (battery safety delay).
- ▪ Dashboard: Progressive LED indicators show charging progress for each slot.
- ▪ Automatic stop: The tower stops consuming power on fully charged slots (LED indicators switch off).
- ▪ Smart maintenance: If a cell weakens during storage, the relevant level restarts a mini corrective cycle.
3-Step Deployment
The power supply unit is hidden at the rear. A standard 220 V socket (10 A) is sufficient.
- Connection: Plug the cable into a wall socket (220 V).
- Initialisation: The structure starts automatically, with no calibration required.
- Insertion: Insert the 12 square cushions. Charging starts automatically.
3) SMART 40x40 Module Anatomy
Thermal Engineering and Finishes
- The Core: Carbon fibre heating layer (15 W) for homogeneous heat distribution without hot spots.
- Protection & Grip: Water-repellent UV-resistant outdoor fabric combined with an anti-slip backing for smooth chairs.
- Touch control: Automatic start at maximum level. Press once = gradual reduction. Third press forces shutdown.
- Hygiene: Removable cover in 3 seconds via zip fastening for machine washing at 30 °C.
Remaining Battery Reading
Hold the touch zone for 3 seconds to trigger LED display:
- 3 green bars: Charge > 60%
- 2 green bars: Charge 30 to 60%
- 1 green bar: Reserve alert (< 30%)
4) Closed Architecture and Anti-Theft Protection
Exclusive Pairing
The charging protocol is proprietary. Each cushion rejects power not supplied by an official tower to protect the LiFePO battery.
- ✅ Allowed: heatme SMART tower only.
- ❌ Forbidden: Qi mats, phones, or third-party chargers.
Natural Anti-Theft Deterrence
The impossibility of recharging a cushion at home makes it worthless to anyone attempting to steal it. The battery drains within hours, structurally reducing theft risk on terraces.
5) Technical Sheet: SMART Tower 12 (40x40) & FAQ
Frequently Asked Questions (Professional FAQ)
If one 40x40 square cushion is damaged, do I need to replace everything?
No. The cover, lithium battery and electronic core can all be ordered and replaced separately. This is the SMART eco-design principle: a damaged module is repaired, not discarded.
Can 30x40 cushions be inserted into this tower designed for 40x40 format?
No. Each tower rail is dimensioned to guarantee precise magnet alignment with its dedicated format. Interchangeability between formats is not possible — each tower is dedicated to one format to ensure optimal and safe inductive transfer.
