Heatscope Pure 3000W ( Color: All Black )

The innovation of the convex SCHOTT NEXTREMA® front panel

What immediately stands out when examining the Pure All Black is its absolute minimalism. The matte black lacquered aluminium body merges with the identically coloured glass-ceramic front. No metal grille, no visible screws, no unnecessary ornamentation: the design is pure, monolithic, and integrates with equal elegance on a raw stone wall, beneath an anthracite aluminium pergola, or on an architectural concrete façade.

However, the SCHOTT NEXTREMA® glass-ceramic front is not merely aesthetic. Its convex curvature is the result of advanced thermal engineering: it acts like a diverging lens that widens the projection angle of infrared radiation. The result? A much more homogeneous distribution of heat across the living zone. No more uncomfortable overheating spots directly beneath the heater: warmth envelops you evenly, reproducing the gentle sensation of sunlight.

This industrial technical glass has an almost zero expansion coefficient. It can withstand extreme thermal shocks (up to 800°C) without cracking. This robustness is essential for an outdoor heater that may be switched on in winter, moving from negative ambient temperature to several hundred degrees in seconds. It is this mechanical endurance that guarantees the exceptional longevity of the Heatscope Pure.

3000 watts of controlled power and low luminance

With a nominal output of 3000 W, the Pure All Black is built to handle demanding conditions and cover large spaces. Its double carbon fibre heating element technology guarantees extremely rapid heating: in less than 30 seconds, the heater reaches full output.

Thermal coverage depends directly on the level of wind protection in your space:

• Up to 18 m²: Indoors (veranda, winter garden, workshop).
• Up to 15 m²: Protected outdoor area (covered terrace with side walls, semi-enclosed bioclimatic pergola).
• Up to 12 m²: Exposed outdoor area (fully open balcony, area subject to air currents).

But the real achievement of the Pure lies in light filtration. Any body heated to incandescence emits visible light (this is the principle of traditional halogen heaters flooding terraces with aggressive red light). Heatscope has succeeded in confining this visible emission below 300 lux. The heater produces only a very discreet amber glow, almost imperceptible, preserving the night atmosphere and subdued ambiance of outdoor dining.

The aesthetic variants of the Pure range

Smartbox and Somfy® home automation: intelligence serving comfort

A premium heater must deliver a flawless user experience. The era of climbing on a chair to unplug a terrace heater is over. The Heatscope Pure relies on an intelligent external control unit: the Smartbox.

Installed between the power supply and the heater, this interface manages the appliance remotely. Using the supplied infrared remote control, you can switch on, switch off, or reduce power to 50% to adapt to mild evening coolness while halving electricity consumption.

IP65 rating: complete climatic resistance

The IP65 certification guarantees the long-term durability of the Pure All Black. Unlike lower protection ratings (IP24) requiring covered areas, IP65 means the heater is completely dust-tight ("6") and resistant to water jets from any direction ("5").

In practical terms, this means it can be installed on an unprotected exterior wall without concern for weather exposure, heavy rain, snow, or accidental water jet cleaning. Its internal engineering prevents harmful condensation, and the total absence of a mechanical fan guarantees 100% silent operation without dust circulation, ideal for outdoor dining.

Installation and thermal coverage zone

The heater is supplied with a robust articulated mounting kit allowing wall or ceiling installation. The swivel bracket allows precise adjustment of angle to direct infrared radiation exactly toward the intended zone (dining table, outdoor lounge). Recommended mounting height is between 2.10 metres and 2.70 metres for optimal comfort.